Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultramid® Advanced T1000HG6 LS BK - PA6T/6I-GF30 - BASF

Check here, which other Ultramid A datasheets, application examples or technical articles are available in Material Data Center

Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Propiedades eléctricas - Otras propiedades - Propiedades específicas del material - Funciones

Any use of this information falls under the rules of our disclaimer.

Texto del producto

Heat stabilized, partially aromatic polyphthalamide for injection molding with strong mechanical properties especially at elevated temperatures and excellent chemical resistance for highly stressed parts. Ultramid® Advanced T1000HG6 LS BK can be characterized as compound with high strength and stiffness, very low water absorption and outstanding dimensional stability. It features a high melting point (320°C) and excellent melt stability.

Markets & applications
Automotive: Fuel system, cooling system, powertrain, Auto E&E, sensors, pumps, fuel cell
Industry goods: Pumps, compressors
Consumer goods: Home appliances, consumer electronics

Caracteristicas de procesamiento y fisicas	Seco / Cond	Unidades	Método de ensayo
ISO Data
Contracción posterior al moldeo, paralelo	0.4 / *	%	ISO 294-4, 2577
Contracción posterior al moldeo, normal	1.0 / *	%	ISO 294-4, 2577

Propiedades mecánicas	Seco / Cond	Unidades	Método de ensayo
ISO Data
Módulo de tracción	11800 / 12000	MPa	ISO 527
Resistencia a la tracción	190 / 180	MPa	ISO 527
Alargamiento a rotura	1.9 / 1.7	%	ISO 527
Resistencia al impacto Charpy, +23°C	55 / 50	kJ/m²	ISO 179/1eU
Resistencia al impacto Charpy, -30°C	50 / 50	kJ/m²	ISO 179/1eU
Resistencia al impacto Charpy c/entalla, +23°C	7.5 / 6.5	kJ/m²	ISO 179/1eA
Resistencia al impacto Charpy c/entalla, -30°C	7 / 6.5	kJ/m²	ISO 179/1eA

Propiedades térmicas	Seco / Cond	Unidades	Método de ensayo
ISO Data
Temperatura de fusión, 10°C/min	320 / *	°C	ISO 11357-1/-3
Temp. de transición vítrea, 10°C/min	130 / *	°C	ISO 11357-1/-2
Estabilidad al calor, 1.80 MPa	275 / *	°C	ISO 75-1/-2

Propiedades eléctricas	Seco / Cond	Unidades	Método de ensayo
ISO Data
Resistividad superficial específica	* / >1E15	Ohm	IEC 62631-3-2
Resistencia dieléctrica	39 / -	kV/mm	IEC 60243-1
Indice comparativo de linea de fuga	- / 600	-	IEC 60112

Otras propiedades	Seco / Cond	Unidades	Método de ensayo
Absorción de agua	4.1 / *	%	Sim. to ISO 62
Absorción de humedad	1.8 / *	%	Sim. to ISO 62
Densidad	1440 / -	kg/m³	ISO 1183

Propiedades específicas del material	Seco / Cond	Unidades	Método de ensayo
ISO Data
Indice de viscosidad	105 / *	cm³/g	ISO 307, 1157, 1628

Funciones

Características

Procesamiento y forma de entrega

Moldeo por inyección

Forma de suministro

Sémola, Negro

Características especiales

Estable contra el calor

Características

Resistencia del fundido

Resistencia quimica

Resistencia química general

Applicaciones

Automotriz, Electrica

Disponibilidad regional

Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa

Demás información

Moldeo por inyección

PREPROCESSING
Pre/Post-processing, max. allowed water content: .05 %
Pre/Post-processing, Pre-drying, Temperature: 120 °C
Pre/Post-processing, Pre-drying, Time: 8 h

PROCESSING
injection molding, Melt temperature, range: 335 - 355 °C
injection molding, Melt temperature, recommended: 350 °C
injection molding, Mold temperature, range: 140 - 170 °C
injection molding, Mold temperature, recommended: 150 °C
injection molding, Dwell time, thermoplastics: 5 min

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.